2Packs Power Distribution Board PDB XT60 BEC 5V and 12V for RC Helicopter Quadcopter Muliticopter Drone

Production Description: General: Input Voltage Range(3S-4S Lipo operation): DC 9-18V. Regulated 5V and 12V outputs. LED power indicators( 5V & 12V outputs). 6 ESC outputs & 1 pair VCC/GND pads ESC outputs: Continuous current: 25A*4 or 15A*6 Peak current (10 seconds/minute): 30A*4 or 20A*6 BEC 5V output: Designed for RC Receivers, Flight controllers, OSD, and Servos. DC/DC synchronous buck regulator. Voltage: 5.0 +/- 0.1VDC Continuous current: 2 Amps (Max.2.5A 10s/minute) Output Ripple: 40mV (VIn=16V, VOut=5V@2A load) Short-circuit tolerant (5 seconds/minute) BEC 12V output: Designed for Video TX or FPV camera with linear regulator. The battery should be 4S LiPo (13~18V DC) Voltage: 12.0 +/- 0.3VDC Continuous current: 500mA (Max.0.8A 5s/minute) Short-circuit tolerant (2 seconds/minute) BEC 12V @ 3S LiPo Output voltage= 3S LiPo voltage -1V Package Include: 2 * Matek PDB-XT60 Power Distribution Board with BEC 5V and 12V 2oz Copper for RC Helicopter Quadcopter FPV Racing.