2GIG Technologies 2GIG-GNGRD1-345

Install the the 2GIG Gun Motion Detector on your unloaded firearm so you can know when your gun has been moved from its stored location. This motion detector provides notifications to your control panel when your firearm has been moved. For added safety, it's uniquely designed with a three digit combination lock and is constructed with hardened steel for durability. This gun motion detector is compatible with GC2 and GC3 security panels (sold separately) and can be installed on many types of firearms such as a handgun, shotgun, or rifle (firearms must not be loaded and have a trigger guard). The 2GIG Gun Motion Detector will periodically transmit a status signal to the 2GIG Control Panel once it's attached to your unloaded firearm. Please note, if it's placed in a safe or locked box, the radio transmission may be impeded. You may need to add a repeater to ensure the communication between the motion detector and the control panel is effective. Notes: Requires connection to a compatible control panel/receiver (2GIG, Honeywell, 345MHz compatible, sold separately). For remote monitoring using a smartphone, requires the Alarm.com app (subscription required). Never install the 2GIG Gun Motion Detector on a loaded firearm. Doing so could cause an accidental discharge causing serious injury, property damage, or death. Never use a broken or damaged 2GIG Gun Motion Detector. Wireless Signal Range: 350 ft (107m), open air with Wireless Control Panel. Transmitter Frequency: 345 MHz. Compatibility: 2GIG. GoControl Sensor Type: Tilt Sensor. Supervisory Interval: 70 minutes Battery: CR2032, 3V (included). Housing Material: ABS Plastic. Projected Battery Life: 5 Years. Operating Rel. Humidity: 0 to 90 percent, non-condensing. Dimensions: 2.3(W) x 1.4(H) x 2.7(L) inches (57.3 x 36.4 x 69.5 mm). Certifications: FCC: Part 15, ASTM: F2346-04, Cal Gun Safety Device. Warranty: 2 Years. Manufacturer Part Number: 2GIG-GNGRD1-345.