220x220mm Magnetic Build Surface Flexible for Anet a8 Wanhao i3 3D Printer Removable Platform Eewolf

220x220mm Magnetic Build Surface Flexible for Ender 3 Ender 3 pro CR20 3D Printer Removable Platform Eewolf Instructions: The magnetic build surface is divided into two parts: A(upper)+B(lower) -Part A: The top is a matte surface, and the back is magnetic(the interaction with the front of Part B plays an attractive role)  -Part B: The top is magnetic (with the adsorption under the Apart), the back is the adhesive (posted on the printer platform, which plays affixed role)  -If it fails to adsorb, please rotate it 90 degrees and try again. How to use:  To use it, simply stick the bottom sheet onto your build plate place, then place the top half on top of the magnetic lower and start printing, peel up the top sheet with finished prints, then flex the top sheet to make the model pop off from the build surface. Snap the top plate back into place, and you're ready for the next round of printing. NOTE:  1>The products are rated for use with PLA filament ONLY. Any use with filaments with high shrinkage coefficients may experience malfunction or decrease in magnetic force over time. This will NOT prevent prints from warping.  2> The products are not for use with high-temperature printing applications above 70*C. Easy removal 3D printing platform for PLA and PLA-based materials  Size:220X220MM (8.66x8.66 Inches)  Weight: 280g  Material: 0.38 coarse sand and PC lamination soft magnet  Production features: stick and use, apply to any printing platform and repeated use.  Color: black  Package included: 1PC Magnetic build surface, 1PC normal build surface.