21 Pcs Screen Printing Starter Kit- Includes Silk Screen Printing Frames, Screen Printing Squeegee, Plastic Scraper, Inkjet Transparency Films, Mask Tape, Wood Sticks and Latex Gloves for Funny DIY

QUANTITY 2 × white mesh silk screen printing frame (15.7 × 11.8 inches / 11.8 × 9.7 inches) 1 × screen printing squeegee 1 × plastic scraper 1 × mask tape 1 × latex gloves 5 × inkjet transparency films 10 × wood sticks INSTRUCTION Step 1: Wash the wood screen printing frame with water, then blow dry with a hair dryer Step 2: Pour the prepared photosensitive glue on the sizing device, apply it evenly on the wooden screen printing frame, and then dry it with a blower Step 3: Place the inkjet transparency film you already engraved a unique pattern at the back of the wood-screen printing frame, expose it to exposure light for a certain period of time, and then wet it with clean water, the pattern will appear, if not, it need to be drenched again. After all the patterns have been presented and dried with a hair dryer, the required screen printing is successfully produced Step 4: Place the wood screen printing frame on the item you need to print the pattern, leave a gap of about 2mm in the middle, put the desired color inkjet aside, and then use the screen printing scraper at a 45-degree angle to apply a little force scrape evenly over, then the pattern is presented, and then completed. NOTE Method of using this product is a little bit complicated, it is recommended to combine our instructions with the picture, so that it is easier to learn. If necessary, you can go to the relevant video website to find the instructional video of the product. After mastering this skill, your life will definitely become more convenient and interesting! When you finished the screen painting , please clean the screen printing mesh, and let it dry.