20mm 075 inch Hubcentric 5x1143 Wheel Spacers 661mm bore 12x125 Studs Compatible with Nissan Infiniti G35 G37 Q50 Q60 Q70 FX35 FX50 350z 370z Altima Maxima 300zx Sentra - Black 662mm 2pcs

[WARNING] VERIFY BELOW BEFORE PURCHASING The included lug nuts extend past the face of the spacers. REQUIRED for the back of your wheels have cavities (at least 2" width and 1/4" deep) in the mounting pad. These cavities are NEEDED so the lug nuts and wheel studs can sit in this pocket. Compatible With: NISSAN 1995-1998 240sx (Will NOT fit Base Models) 1987-1996 300zx 2003-2019 350z & 370z (Requires removal of Wheel Guide Bolt on Front Rotor for proper install) 2002-2019 Altima 1989-2018 Maxima 2003-2019 Murano 2008-2019 Rogue 2007-2012 Sentra (SE-R and SE-R Spec V ONLY) 2012-2019 Sentra INFINITI 2003-2014 FX35, FX45, FX50 2003-2009 G35 2008-2014 G37 1996-2005 I30 2002-2005 I35 1992-1997 J30 2003-2011 M45 1990-2008 Q45 2014-2019 Q50, Q60, Q70 2014-2019 QX60 2014-2018 QX70 IMPORTANT - Must check before purchasing - SAFETY / INSTALL WARNING: Do NOT install wheel spacer if your wheel studs or lug nuts make contact with the back of your wheels. - Wheel Stud Length: Your vehicle's wheel studs need to be less than 3/4" (20mm). If not, the back of your wheels need pockets long/wide enough for your studs. - Fender Gap: Measure your wheel gap for clearance. You will need at least 3/4" (20mm) of fender clearance to prevent the wheel/tire from hitting the fenderliner. - Fitment: Use the Applications list above. If your vehicle is not on the list, message us so we can help find the correct item. - No Returns or Exchanges once installed. Have Questions? Please use the "Customer Questions & Answers" feature in this listing below this section.