[2019 Latest] HDTV Antenna Indoor Digital TV Antenna, 60 Miles Range with Amplified Signal Booster Support 4K 1080P Freeview Channels - 13.2Ft Coaxial Cable and Power Adapter

Set up Guide: Step 1: Connect the end (F male) of attached coaxial cable to ANT / IN connector at the back of the TV or DVB-T tuner. Step 2: In the TV's setup menu, set the tuner mode to "Antenna" or "Air". Refer to the TV manual for detailed instructions. Step 3: In the TV's setup menu, set TV to "scan" for channels. This can sometimes be listed as auto-program, auto-scan, channel search or channel scan. Consult the TV manual for detailed instructions. Step 4: If reception is sporadic, try moving the aerial to another location and rescanning the TV. Step 5: Placing the aerial higher or close to a window may result in better reception. Please rescan the channels whenever you move the antenna. Note: 1. If you use a flat HDTV, pls go through your TV manual to make sure your TV is with built-in tuner for freeview. 2. You should retune your Freeview TVs and digital boxes from time to time to ensure you are receiving all available services. Retuning takes only a few minutes and can be done with your remote control. Package Contents: 1. Antenna with attached 13.12 coaxial cable 2. Antenna stand 3. 3M stickers 4. Signal booster 5. Power adapter Specifications: -Working Frequency: VHF172~240MHz,UHF 470~862MHz -V.S.W.R.: ?2 -Max Gain: 5dBi(30dBi with amplifier ) -Impedance: 75Ohm -Material of Coaxial Cable: Cu 1.5C-2V L=13.12ft M -Signal Booster Cable: 3.28ft -Connector Type: F Male -Reception Range: 60miles with amplifier - Size: 12.9*11.9*0.02in