2 PiecesZigbee Home Smart ControllerZigbee Smart SwitchCompatible with Amazon Echo Plus Alexa and Smart Things Hub APP Voice Controlled

Connection instructions Single volume: 9.28 × 4.22 × 2.36cm Housing material: V0 flame retardant material Working voltage: AC 85V~265V Working frequency: 50/60Hz Rated current: 10A Wireless frequency: 2.412~2.484GHz Wireless IEEE Standard: IEEE 802.15.4 Self-power consumption: ?0.3W Working conditions: temperature -30~60°C Installation guides If it is a hard wire ,it can be stripped 8-10mm and directly insert the wire into the hole of the live and neutral line. If it is a soft wire,you can strip 7-9mm and insert the wire into the VE1008 terminal,then press it with a diagonal clamp.After this ,you can insert the terminal into the hole of the live and neutral line.You can also put the screwdriver into the small hole on the front of the con-troller and press,thus you can insert the wire into the hole of the live and neu-tral line.if you need to pull out the installed wire,you can put the screwdriver into the small hole on the front of the controller and press Connection Instructions: To connect to your APP, choose manufacturer "eWeLink" when you add the device. 1. Confirm that the Zigbee OnOff Controller indicator is in flashing state. If the LED red indicator is always on, please press the side button to make it flashing, and it is in configuration state 2. If the equipment has been installed or needs to be reconfigured to enter the network, the power can be cut off for 5 times, leaving the controller in the configuration state 3. Open the APP of Samsung SmartThings hub or OSRAM PRO or other zigbee HA gateway to add devices 4. There are two ways to restore factory Settings (the controller enters the reconfiguration state). The first way is to press the side key (the small hole on the side of the controller) until the red LED light is in flashing state 5. Support gateway types: samsung SmartThings hub, amazon ECHO PLUS