2 Pairs Sintered Metal Disc Brake Pads for Shimano Deore XT M765 M775 M776 XTR M965 M966 M975 LX M585 T665 SLX M665 M535 M595 M596 Hone M601 Alfine S500 S501 Saint M800 M545 R505 T605 A01S M07 M07Ti

Replacement Brake Pads Compatible with Below Disc Brakes For Shimano XTR BR-M965 BR-M966 BR-M975 Shimano Saint M800 Shimano Deore XT BR-M765 BR-M775 BR-M776 Shimano Deore LX BR-M585 BR-T665 Shimano SLX BR-M665 Shimano Deore BR-M535 BR-M595 BR-M596 Alfine S500 S501 A500 S505 Shimano A01S M07 M07Ti M07S Ashima APV PCB TRP Dash Hone M601 Non-Series BR-M545 BR-R505 BR-T605 Sintered Pads Sintered pads are made up of hardened metallic ingredients, which are bound together with pressure and temperature. Pros -fade at a higher temperature than resin pads -better performance in wet conditions -last longer Cons -louder -longer break-in time -not as much initial bite -heat is conducted through the caliper, not the rotor These pads will be better if you are a heavier rider. These pads are recommended for riding in wet, muddy, or dusty conditions. They are also a lot better if you are running small rotors, or are on a long descend. Although they are more noisy, and do not have as much of an initial bite as organic pads, you will definitely notice the increased performance at the end of your run. This happens because the heat is put back through your caliper, rather than your disc where you would get brake fade. Since these pads are made of a harder compound they will last longer than resin pads, but do not buy these pads just because they last longer. Always buy the pad that will enhance your performance the best, they are cheap you can always buy more if they wear out.