2-Pack Undercounter Dishwasher Bracket Replacement - Whirlpool -Compatible - Compare to 8269145 / WP8269145 - Replacement Dishwasher Upper Mounting Bracket

Installation Directions: 1.) Turn off power to your dishwasher in breaker box (Absolutely Critical To Avoid Shock) 2.) Rotate lower access panel fasteners and remove them 3.) Remove access panel/sound dampening pad. Determine if the water supply or power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4.) Open dishwasher door, remove the screws from the existing brackets (if present) 5.) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6.) Carefully pull dishwasher a few inches away from the front of the cabinet 7.) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8.) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9.) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10.) Reverse steps 3, 2 and 1. This is a generic product manufactured and distributed by Products This is not a Whirlpool, Sears, Kenmore, Amana, Jenn-Air, Crosley, Maytag Roper, Magic Chef, Estate or Inglis OEM product and Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer's warranty (except for Products). The Whirlpool, Sears, Kenmore, Amana, Jenn-Air, Crosley, Maytag, Roper, Magic Chef, brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool, Sears, Kenmore, Amana, Jenn-Air, Crosley, Maytag, Roper, Magic Chef model or any other related designations are made solely for purposes of description.