12V Wireless Remote Control Module 1 Channel IR Infrared Remoting Switch Receiver Kit with LED Indicator Relay Switch Module Industrial Remote Control Module

Feature:1. This is a single channel 12V relay switch module that can be controlled by IR. 2. The infrared remote control has two buttons and control distance is between 5 and 8 meters. 3. Designed with working state indicator lights of power supply and relay. 4. Module provides NO and NC connector, relay load capacity is 250VAC?10A, 125VAC?10A, 30VDC?10A, 28VDC?10A. 5. This product can be used for most domestic appliances to realize remote control function. Spec: Item Type: Wireless Remote Control Module Module Introduction: Working Voltage: 11.5-12.5VInput Terminal: Red wire connect to the positive pole of the power supply, black wire connected to the negative pole of the power supplyWorking Current: About 40mA (relay pull-in state)Static Working Current: About 4mA (relay release state)Receiver Size: Approx. 50 x 35 x 22mm / 2 x 1.4 x 0.9in (with shell, shell with screw hole)Module Type: 1 button infrared controlReceiving Distance: Approx. 5 ~ 8meters / 16.4 ~ 26.2ftWorking Mode: Self-lockingWork Instructions: LED1 (power indicator light), LED2 (relay switch indicator light)The module provides NO and NC interfaces after electrical isolation. The load capacity of the relay is 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A, which can drive most household appliances or other equipment to achieve remote control functions.Instructions: Module as a switch. Wiring Method: Input Terminal: Connect the red wire to the 12V positive pole, and the black wire to the negative pole of the 12V power supply. The output terminal only needs to connect your device between the blue and white wires, and the other two are ignored. (But it must not be short-circuit