12V DC 4 Channels Wireless Remote Control Illumination Switch with 50M-100M Long Distance Transmitter Relay RF Remote Control Light Switches for Pump Security Systems Outdoor Indoor Remote Control

Package Include: 1* Receiver (with cover) 1* Remote Control (with battery, If you need extra remote control, please tell us. ) Item specifics Item Type:Switches Warranty:1 Remote Distance:50M Switch Type:Remote Control Product Description 1.Working Voltage: DC12V±10% (If you need DC24V, please tell us.) 2.Current:Standby less than 10mA,Working less than 128mA 3.Working Temperature: -10'C—+60'C 4.Receiver Frequency: 433.92MHZ 5.Receiving Sensitivity: -105dB 6.Output State: Switching Value 7.Max Load:10A Relay, Resistive load less than 8A,Inductive load less than 3A 8.Receiver Board Size:70*50*18mm 9.Case Size:75 * 55 * 30mm Encoding Type: Learning Code Add transmitter by the Learning Button on the receiver Output State: It is adjusted by the Jumper on the Receiver Board, Momentary-----Jumper on 1 Pin or Take away the Jumper Toggle--------Jumper on "3&4" Latched-------Jumper on "1&2" Momentary-----Press the transmitter button A,the receiver relay A is ON; Release button A ,The receiver relay A is OFF ,The same as B/C/D Toggle--------Press the transmitter button A For 1 time ,the receiver relay A is ON; Press button A again,The receiver relay A is OFF ,The same as B/C/D Latched------ Press transmitter button A,the receiver relay A is ON,the relay B/C/D is OFF .... Press transmitter button D,the receiver relay D is ON,the relay A/B/C is OFF It mean ,Latched only can keep 1CH ON,and it will ofen have 1CH is ON Learning Method Input DC12V Power for the receiver,press the learning button ,Green LED indicator OFF,Then press transmitter ,the LED indicator flash fast,It mean learning successfully. Clearing Code Keeping press the learning button 8 seconds until the LED indicator ON, It mean the code have been cleared successfully.