12A Step-Down Module Constant Voltage Constant Current LCD Display Adjustable Step-Down Power Supply

Product Parameters: Input Voltage: 5.3-32V (limit 35V; minimum input 4V to achieve step-down, but the input voltage below 5.3V is not accurate) Output Voltage: 1.2-32V (The input voltage must be higher than the output voltage, the minimum differential voltage is 0.8V) Output Current: can work stably at 8A for a long time, and can reach 12A under enhanced heat dissipation Output Power: natural heat dissipation 120W (within 8A), enhanced heat dissipation 160W Voltage Display: resolution 0.05V, range 0-32V Current Display: resolution 0.01A, range 0-12A Conversion Efficiency: about 96% Working Current: about 25mA Soft Start: Yes (large power with load module may fail when starting) Input Reverse connection Protection: Yes Output Anti-backflow: no Short Circuit Protection: Yes Size: 82*52*32mm Shell Material: Acrylic Weight: 80g Features: 1. Crystal case, beautiful design, good touch and touch texture; 2. Press the button to control the output to turn off, and you can set the power-on default to ON or OFF; 3. The liquid crystal display can display input and output voltage, output current and output power; 4. The input end is anti-reverse protection, and the reverse connection will not burn; 5. High efficiency over 95%, high current, low heat generation, output voltage 1.2-32V can be adjusted freely, constant current value 0-12A can be adjusted.Suitable for high power LED constant current drive, lithium battery battery charging, etc. Instructions: 1. Use as a normal buck module with overcurrent protection 2. Use as a battery charger 3. As a high power LED constant current drive module Package: 1 x 12A Step-down Module 1 x Acrylic shell(Need to install it yourself)