QL Electronics 120pcs Solder Seal Heat Shrink Wire Connectors.
Contains high quality wire terminals that can be used in a variety of wiring projects.
Whether you are on a boat, in a car, at home or on a science project, these connectors ensure that a solid and durable solder is achieved every time.
The tubes are color-coded for easier identification with a transparent sleeve for precise inspection when inserting wires.
Technical Specification:
Shrinkage ratio is 2:1
Minimum temperature for solder to melt: 280°F / 138°C
Minimum shrink temperature: 176° F / 80°C
Operating temperature: -55? - 125°C
Sizes:
25 x White Connectors: Diameter 1.7 mm, Cable cross-section 0.25-0.34 mm²(A.W.G.:26-24)
45 x Red Connectors: Diameter 2.7 mm, Cable cross-section 0.5-1.0 mm² (A.W.G.:22-18)
40 x Blue Connectors: Diameter 4.5mm, Cable cross-section 1.5-2.5 mm² (A.W.G.:16-14)
10 x Yellow Connectors: Diameter 6.0 mm, Cable cross-section 4.0-6.0 mm² (A.W.G.:12-10)
Features:
Solder and adhesive on the inside make it waterproof
Waterproof connections will protect wires from corrosion
Transparent sleeves for visual inspection
No wire damage due to lower melt temperature solder
Compliant with ROHS, ISO 9001:2008, SGS and CE standards
Notes:
?For best results, be careful while using the air gun not to overheat the tubes,
focus the hot air on the solder while rotating the cable until the solder melts and fills in the gaps within the connector.
Take into consideration that the temperature range can vary depending on the size of the connector (white, red, blue and yellow)
?60 days money back policy for any reason
Contains high quality wire terminals that can be used in a variety of wiring projects.
Whether you are on a boat, in a car, at home or on a science project, these connectors ensure that a solid and durable solder is achieved every time.
The tubes are color-coded for easier identification with a transparent sleeve for precise inspection when inserting wires.
Technical Specification:
Shrinkage ratio is 2:1
Minimum temperature for solder to melt: 280°F / 138°C
Minimum shrink temperature: 176° F / 80°C
Operating temperature: -55? - 125°C
Sizes:
25 x White Connectors: Diameter 1.7 mm, Cable cross-section 0.25-0.34 mm²(A.W.G.:26-24)
45 x Red Connectors: Diameter 2.7 mm, Cable cross-section 0.5-1.0 mm² (A.W.G.:22-18)
40 x Blue Connectors: Diameter 4.5mm, Cable cross-section 1.5-2.5 mm² (A.W.G.:16-14)
10 x Yellow Connectors: Diameter 6.0 mm, Cable cross-section 4.0-6.0 mm² (A.W.G.:12-10)
Features:
Solder and adhesive on the inside make it waterproof
Waterproof connections will protect wires from corrosion
Transparent sleeves for visual inspection
No wire damage due to lower melt temperature solder
Compliant with ROHS, ISO 9001:2008, SGS and CE standards
Notes:
?For best results, be careful while using the air gun not to overheat the tubes,
focus the hot air on the solder while rotating the cable until the solder melts and fills in the gaps within the connector.
Take into consideration that the temperature range can vary depending on the size of the connector (white, red, blue and yellow)
?60 days money back policy for any reason
