12 Gauge Fuse Holder ATC/ATO SIM and NAT 5 Packs in-Line Automotive Blade Fuse Holder with 65PCS Standard Car Fuses 1A 2A 3A 4A 5A 7.5A 10A 15A 20A 25A 30A 35A 40A Automotive Replacement Fuses

What is Car Fuses & Car Fuses Holder: An automotive fuse is an electrical component that is designed to protect other components, devices, and wiring from any damage that might occur due to excess current flow. When a circuit fails or is abnormal, the current is constantly rising, and the increased current may damage some important devices or valuable devices in the circuit, and may also burn the circuit or even cause a fire. If the fuse holder fuse holder is correctly placed in the circuit, the fuse will blow itself when the current abnormally rises to a certain height and a certain degree, and a dangerous situation such as a fire may occur. At this time, the fuse holder acts to isolate from the outside world, thereby protecting the circuit from safe operation. Installation: Cut this looped wire about in the middle first, one of the ends connect to your power source, the other to the accessory power wire that you are attempting to power. Specifications: Type: In-line ATO/ATC fuse holder. Cable Type: 12 AWG. Loop Length: 12 inches / 30cm. Amp Range of Fuse Holder: 1 to 40A Fuse Holder Voltage Max Operating:32V DC For Standard/Regular Blade Fuse(ATO); dimension: 19.1 × 18.5 × 5.1 mm. Fit Fuse: ATC/ATO blade fuse of 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 35A, 40A. It features a water resistant cap and a loop 14-gauge insulated wire. Package included: 10 x In-line Fuse Holder Waterproof 50pcs Regular Car Fuses (1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A,30A, 35A, 40A); 5pcs each