OEM Part Number(s): 1120940048, A 112 094 00 48, 5101204AA, 5101 204AA, 5S2775, MF21039, 7410091, 917812, 1570332
Compatibility?
2004-2008ChryslerCrossfire3.2L, V6
2001-2005Mercedes-BenzC240
1998-2000Mercedes-BenzC280
2002-2004Mercedes-BenzC32 AMG
2001-2005Mercedes-BenzC320
1998-2005Mercedes-BenzCLK320
1998-2004Mercedes-BenzE320
2005Mercedes-BenzE320GAS
1998-2003Mercedes-BenzML320
2003-2005Mercedes-BenzML350
2006Mercedes-BenzS350
2002-2004Mercedes-BenzSLK32 AMG
2001-2004Mercedes-BenzSLK320
Package Included:
One Air Flow Sensor/meter
How To Install The Replacement Mass Air Flow Sensor
1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
2. Install sensor-to-air-duct seal(s), if so equipped, on the replacement MAF sensor.
3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary.
NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.
5.CAREFULLY plug the harness connector lead into the MAF sensor.
Compatibility?
2004-2008ChryslerCrossfire3.2L, V6
2001-2005Mercedes-BenzC240
1998-2000Mercedes-BenzC280
2002-2004Mercedes-BenzC32 AMG
2001-2005Mercedes-BenzC320
1998-2005Mercedes-BenzCLK320
1998-2004Mercedes-BenzE320
2005Mercedes-BenzE320GAS
1998-2003Mercedes-BenzML320
2003-2005Mercedes-BenzML350
2006Mercedes-BenzS350
2002-2004Mercedes-BenzSLK32 AMG
2001-2004Mercedes-BenzSLK320
Package Included:
One Air Flow Sensor/meter
How To Install The Replacement Mass Air Flow Sensor
1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
2. Install sensor-to-air-duct seal(s), if so equipped, on the replacement MAF sensor.
3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary.
NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.
5.CAREFULLY plug the harness connector lead into the MAF sensor.