10Pcs 1.6X330mm Aluminum Alloy Silver Welding Brazing Wire Solder TIG Filler Rod for DIY Craft

* Specification: Type: Aluminum alloy welding brazing rod Material: Aluminum alloy Color: Silver Melting point: about 650? Application:Aluminium and aluminium alloy welding, brazing * Process: 1. Light the torch, (fire shall not betoo small, to be able to easily burn pipe next to the heat sink). End of burn (preferably vertical burning, the torch can be slightly higher, with blue flames), in the burning process on the electrode heating and welding solder powder on powder put it on the stick. 2. With solder powder and try paddling at the required welding welding electrode, such as temperature, just like water into welding electrode. 3. If take off the non-stick electrodes continue to the end of heating. (Not deliberately used in the welding process the flame burned electrodes, or keep it vertical burn status. Uploaded under the electrode will depend on melting temperature. 4. Upon close you will find that the electrode is first melted under). Which is why cold electrodes can be causes of welding very thin aluminum parts.Wash after welding to weld solder powder, finished. * Feedback: You satisfaction and positive feedback is very important to us. Please leave positive feedback and 5 stars if you are satisfied with our items and service. If you have any problems with our items or services, please feel free to contact us first before you leave negative feedback. We will do our best to solve any problems and provide you with the best customer services. Your encouragement and support is our continuously forward momentum. Best Wishes!