100 Total Transfer Tamper Proof Security Warranty Void Stickers/Labels/Seals (Red, 35x120 mm, Serial Numbers - TamperSTOP)

Used to seal non-reusable boxes or packages, traces of security print or pattern will be totally transferred to the applied surface if these security stickers are removed. The stickers can be attached practically to almost everything - doors, counters, computers, shop windows, equipment, boxes, cells, safes, cabinets, exhibitions, envelopes, documents, etc. Before applying the stickers it is necessary: Shipping: Labels must not be exposed to temperatures over 100°F (37°?) during shipment or storage. Temperatures over 100°F can damage the labels and shorten the shelf life. Recommended Application: 1.If needed, clean the application surface with 90% Isopropyl Alcohol prior to affixing the label. 2.Apply security label to the clean & dry surface at or above the recommended application temperature. Notes: On the recommended surfaces at 70°F, the tamper evident feature should be functional within 1 minute of application. Other surfaces or lower temperatures may require more curing time. If the tamper evident feature does not perform immediately, more curing time usually improves the performance of the tamper evident feature. For best results, allow 1 hour curing time after application. General Minimum Application Temperature: +40°F. General Service Temperature Range: -40°F to +160°F. Storage: 1.Storage Temperature: 40°F to 100°F. 2.Storage Humidity: 20% to 60%. 3.Minimum Shelf Life: 2 Years. To use this item better, pls download "Technical Specification (SGS Test Report & Tech. Data)" at bottom by yourself.