10 Pcs 4 Pin RGB 5050 LED Strip Connectors LED Strip to Strip Unwired Gapless Solderless Adapter Terminal LED Tape Extension for 10mm Wide SMD 5050 Multicolor LED Strip

These 4 pin RGB 5050 LED strip connectors provide straight connecion for your DIY project. Precautions before installation: When you cut your LED strip into 2 LED strips, you should cut very carefully along the cutting line, to make sure the area of the copper contacts on the 2 LED strips are the same. (not a bigger area of copper contacts on one LED strip, and a smaller area of copper contacts on the other LED strip.). If the area of the copper contacts on the LED strip is too small, the 4 electrical conductors in the connectors can not totally touch the 4 copper contacts on the LED strip, and there will be poor electrical conductivity. As a result, you may get 2 different colors or even get no colors at all. Installation Instructions: 1. Ensure your LED strip is 10mm wide 4 pin RGB 5050 LED strip and has 4 copper contacts (+, G, B, R). 2. Carefully cut your LED strip along the cutting line. 3. Open the cap of the connector. 4. If you use a non-waterproof LED strip, please insert the LED strip into the connector. Make sure the 4 copper contacts on the LED strip are under the 4 electrical conductors in the connector. Make sure to match the + side of the LED strip to the + side of the connector; If you use a waterproof LED strip, please first remove the silicon around the cutting line, then insert the LED strip into the connector. Make sure the 4 copper contacts on the LED strip are under the 4 electrical conductors in the connector. Make sure to match the + side of the LED strip to the + side of the connector. 5. Close the cap of the connector. Warm Reminder: If you meet any problems during installation, please contact us by clicking the "Ask a question" button, you will get a reply within 24 hours. Package Includes: 10 x Gapless 4 pin RGB 5050 LED strip connector