10/100Mbps Fast Ethernet Media Converter, Single-Mode SC Fiber, up to 20KM, 10/100Base-TX to 100Base-FX

Features: 128 K's data buffer RAM Support for low-delay time pure data transmission and full/half-duplex flow control. Built-in watch-dog timer to monitor any error in internal data exchange Interface: 1 x Ethernet port (RJ45) 10/100Base-Tx 1 x Optical port (Dual SC) 100Base-Fx Optical Port: 1310nm Single mode Transfer Distance: up to 20km Connectors: Dual SC connector Fiber core: 8.3um, 8.7um, 9um and 10um on single mode fiber Optical Power (dBm): -15~ -3 Receiving Sensitivity (dBm): ?-32 Ethernet Port: In accordance with Ethernet standards IEEE802.3 10Base-T, IEEE802.3u 100Base-T and 100Base-FX Available speed: auto-detective 10/100Mbps Full-Duplex and Half-Duplex auto-negotiation Connectors: RJ-45 connector; MDI/MDI-X connection auto-sensing LED Indicators: FX, TX, Link/Act(Left/Right), FDX, PWR FX: Light on when fiber speed is 100Mbps, while "OFF" means the rate is 10 Mbps TX: Light on when TP speed is 100Mbps, while "OFF" means the rate is 10 Mbps. Link/ACT: Left side is indicate for fiber port link/act and right side for TP,light flashing when data transmitting and receiving FDX: Light on when TP full-duplex mode is active,light off when TP half-duplex mode is active PWR: Light on when DC power on, else light off Specifications: Output voltage: AC 220V or DC5V 1A Power dissipation: ?1 watts Housing: Metal enclosure Volume: 94x70x26mm (LxWxH) Operating Temperature: 0°C to 60°C Storage Temperature: -20°C to 70°C Humidity: 5% to 90% RH Checklist: Before you installing the Converter,verify that the package contains the following: 1.The Ethernet Media Converter 2.AC/DC Power Adapter 3.User's Manual