1-Way Car Security Alarm System with Passive Keyless Entry Remote Engine Start Push Button Star

Note: When the system host into the anti-theft state, if the illegal car door, the car will be long tweet warning. Tips: This product requires a certain technical basis for the installation, it is best to find relevant professionals to install Working Voltage: +12v+2V Working Current: 6mA Remote control frequency: 433MHZ Receive frequency: 433MHZ Internal lighting: blue, red and yellow 4 conductive contacts, do not use the current old mechanical key switch, the use of the effective number of 30 million times, without replacement Remote start function 1. To ACC, ON file first power supply, and then start the car 2. Long press 5 seconds to start the remote control button,but also remote flameout 3. Remote start detection handbrake, do not pull the hand brake remote start is invalid, 4. 10 minutes after the start of remote control without operation is automatically turn off, the brake on the car to stop the flame function is canceled Sensing mode switching function How To Use: 1. Open the ACC bar first 2. At the same time press the remote control unlock key and lock key 1 seconds after release 3. Horn sound that open the induction function Emergency car function --When the induction remote control is lost or damaged, then want to use the car according to the following methods: Use the spare key to open the door, find the host open and long press --The host code on the switch for 5 seconds, then the speaker chirp 3, it means that anti-theft lock function will be lifted, the vehicle can use --Remote start automatically locks the door function --After each remote start or close the remote start, the system will automatically lock the door to ensure vehicle safety Package : 1x engine start button(Host) 1x Start button 1x Poutput line 1x 6P output cable 2x Smart remote control 2x Antenna 1x Manual