1 Quart DOMINATOR Stone+, Low Gloss Stone Sealer and Clay Brick Sealer (Wet Look), Commercial Grade, Water Based, Color Enhancing, Easy Application

Uses STONE+ is a sealing and joint stabilizing product with a Low-Gloss to No-Gloss finish which enhances the natural color of surfaces. This product can be applied to clay pavers as well as natural and faux stone, travertine, and vertical surfaces. This water-based formula provides a high quality alternative to traditional solvent-based sealers, forming a durable barrier that defends against oil, food, and other stains. Features One-part formula allows for ease of use and minimal cleanup. STONE+ is breathable allowing it to be applied to damp surfaces (without standing water), while also allowing efflorescence and moisture to escape from pavers. An industrial grade UV protection additive defends surfaces from the damaging effects of the sun, while the Low VOC (Volatile Organic Compounds) content exceeds all federal, state, and local regulations. USDA Certified Bio-Based Black Diamond Coatings is 1 of 5 companies in its respective category to that receive this status. In order to meet the criteria, a product must contain at least 11% renewable resources from agricultural, marine, or forestry materials. Black Diamond Coatings STONE+ has 50% Bio-Based Materials, more than 4 times the requirement. This is in an effort to reduce dependency upon petroleum based products. Application Generally, apply one coat of sealer to clay or stone surfaces. It is recommended to use a high pressure sprayer with a fan tip. Ensure smooth application of sealer. If product puddles or drips on the surface, back-roll to smooth out excess product for even coverage. DO NOT FLOODCOAT. Coverage is up to 400 sq. ft. per gallon per coat. Please visit our website for detailed application instructions, Technical and Safety Data Sheets, video demonstrations and other helpful information. Made in the USA.