1 Channel 12V Wireless Remote Control Module Single Channel Infrared Remoting Switch Receiver Kit for Domestic Applications

Specification: Item Type: Wireless Remote Control Module Module Introduction: Working Voltage: 11.5-12.5V Input Terminal: Red wire connect to the positive pole of the power supply, black wire connected to the negative pole of the power supply Working Current: About 40mA (relay pull-in state) Static Working Current: About 4mA (relay release state) Receiver Size: Approx. 50 x 35 x 22mm / 2 x 1.4 x 0.9in (with shell, shell with screw hole) Module Type: 1 button infrared control Receiving Distance: Approx. 5 ~ 8meters / 16.4 ~ 26.2ft Working Mode: Self-locking Work Instructions: LED1 (power indicator light), LED2 (relay switch indicator light) The module provides NO and NC interfaces after electrical isolation. The load capacity of the relay is 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A, which can drive most household appliances or other equipment to achieve remote control functions. Instructions: Module as a "switch". Wiring Method: Input Terminal: Connect the red wire to the 12V positive pole, and the black wire to the negative pole of the 12V power supply. The output terminal only needs to connect your device between the blue and white wires, and the other two are ignored. (But it must not be short-circuited) Package List:1 x Wireless Remote Control Module