0.96 OLED Display Module FBHDZVV 128 x 64 Pixel IIC 12864 OLED White I2C 0.96inch OLED Display IIC Serial with SSD1306 Chip Compatible with Arduino UNO Raspberry Pi

Specifications: 0.96 inch OLED display chip: SSD1306 Interface Type: IIC / I2C-4PIN High Resolution: 128 * 64 Pixels Voltage: 3 V ~ 5 V DC Viewing Angle: greater than 160 degrees Low power consumption : Full Screen 0.08 w Operating Temperature: -30 Celsius ~ 70 Celsius Support many control chips: Fully compatible with Arduino, Raspberry Pi, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc Pin Definition: GND: OLED Power Ground VCC: OLED Power Positive 3.3-5 V SCL: OLED IIC Clock SDA: OLED IIC Data Line Note: OLED is self-luminous, no backlight needed! It does not respond when you just connect it to the mains, you have to program it and work properly, then it will display normally. 1 X 0.96 Inch I2C OLED Display 1 X Plastic stoage box