0.1-2000MHz RF Broadband Amplifier Ham Radio Module 30dB High Gain Low Noise LNA Amplifier Module Board

Commonly used in broadband systems, small signal amplification, RF front-end signal enhancement, HF shortwave, FM, VHF / UHF UHF high frequency amplification and other occasions. Specifications: Size: 24*53mm/0.94*2.08" Operating Frequency: 0.1-2000MHz Amplifier Gain: F=0.1MHz, gain=32dB F=500Mhz, gain=31dB     F=1000MHz, gain=29dB F=1500Mhz, gain=25dB F=2000MHz, gain=20dB Maximum Power Output: +10dBm (10mW) @1dB Compression point Power Supply Voltage: 6V-12V DC System Impedance: 50? Tips: 1.Amplifier working frequency of the lower limit is subject to input and output capacitor, the default value is 0.1 uF, working to 0.1 MHz. 2.Increase the input and output capacitance appropriately,can extend the cut-off frequency, such as 10uF capacitance can work to 5KHz. 3.When the power supply voltage changes in 5V-8V, it can be used as a variable gain amplifier, gain increases with the increase of the power supply voltage, which suitable for radio frequency receive front-end circuit, using DA control power supply voltage, to control the gain of the amplifier, automatic gain control. 4.When the power supply voltage in 8V-10V, the low frequency end gain up to 30 db, at this time the amplifier has a low noise coefficient and good stability. 5.When the voltage is 12V, reach maximum gain, the low frequency end gain of 32.5 dB. Package Includes: 1 x 0.1-2000MHz RF Wideband Amplifier